Heat Curing Silicone Optical Adhesive BTL-5123AB

BTY-5123AB is a two-component addition heat cured silicone rubber, which is soft gel-like after curing. It has excellent yellowing resistance, UV aging resistance and low shrinkage. After curing, it has good initial viscosity and excellent adhesion to the substrate. It is mainly used for full bonding of touch screens, LCDs, etc.

Category: Silicone Coating and Ink

Using Manual Of Heat Curing Silicone Optical Adhesive BTL-5123AB

1. Surface treatment

All sizing interfaces must be cleaned. During use and storage, it must be ensured that there is no catalyst toxic substances such as phosphorus (P), sulfur (s), nitrogen (n), organic tin (SN), water, polyurethane and so on, so as to avoid curing hindrance and deterioration.

2. Mix

Component A is a cross-linking agent B contains a catalyst. The catalyst can make a gel containing crosslinking agent gel. Therefore, when using a scraper and other operation tools, we must avoid mixing with this component.

3. Solidify

The curing time of liquid silicone rubber is closely related to curing temperature and colloid thickness. The conventional mixing ratio of a / B is 1:1. The proportion deviation has a certain impact on the colloidal hardness. Increasing group A will improve the hardness of the cured product.

Precautions Of Heat Curing Silicone Optical Adhesive BTL-5123AB

Before bonding, it is necessary to test the matching of glue with LCM and TP;

After the bonding is good and cured according to the normal process, it needs to be placed at 25 ℃ for 7 days before environmental testing.

Package Of eat Curing Silicone Optical Adhesive BTL-5123AB

A: 5 kg/barrel; B: 5 kg/barrel

A: 15 kg/barrel; B: 15 kg/barrel

A: 180 kg/barrel; B: 180 kg/barrel

For more information about china silicone rubber, please feel free to contact us!