Waveguide Calibration and Verification Kits

Dolph Microwave manufactures high-performance precision waveguide calibration components, including all precision waveguide calibration components needed for measuring 12 error corrections of waveguide components, can be used with any type of vector or scalar network analyzer.

The product frequency range covers 1-110GHz. At the same time, non-standard waveguide and double-ridge waveguide calibration parts are also available. For more information feel free to call us and discuss your needs with one of our sales engineers.

Ordering Guide of Waveguide Calibration and Verification Kits

Flange type: Multiple types available - see Technical Reference page.

Finish: Corrosion protection plus black/grey top coat.

Standard unit provided not sealed pressure tight unless otherwise specified.

No. Description Parameter Qty

1 WG to Coaxial Adapter Each of Male and Femele Connector 2

2 WG Matched Termination VSWR≤1.03 1

3 WG Short Plate VSWR≥60 2

4 1/4λPrecision WG Section L=1/4λ 1

5 1/8λPrecision WG Section L=1/8λ 1

6 3/8λPrecision WG Section L=3/8λ 1

7 Packing Case of Aluminum Alloy / 1

8 Screws / 1

Datasheet of Waveguide Calibration and Verification Kits

Model No* Freq Range (GHz) VSWR (Max) Dimensions

L*B*A (mm) WG Type Flange Material

IEC EIA

DH-3WCAN... 0.32-0.49 1.25 400*384*676 R3 WR2300 FDP/FDM Al

DH-4WCAN... 0.35-0.53 1.25 380*359*626 R4 WR2100 FDP/FDM Al

DH-5WCAN... 0.41-0.62 1.25 350*318*546 R5 WR1800 FDP/FDM Al

DH-6WCAN... 0.49-0.75 1.25 300*280*470 R6 WR1500 FDP/FDM Al

DH-8WCAN... 0.64-0.98 1.25 260*235*381 R8 WR1150 FDP/FDM Al

DH-9WCAN... 0.75-1.15 1.25 231*212*336 R9 WR975 FDP/FDM Al

DH-12WCAN... 0.96-1.46 1.25 166*187*285 R12 WR770 FDP/FDM Al

DH-14WCAN... 1.13-1.73 1.25 150*138*220 R14 WR650 FDP/FDM Al

DH-18WCAN... 1.45-2.20 1.25 120*120*185 R18 WR510 FDP/FDM Al/Cu

DH-22WCAN... 1.72-2.61 1.25 100*106*161 R22 WR430 FDP/FDM Al/Cu

DH-26WCAN... 2.17-3.30 1.25 90*95*138 R26 WR340 FDP/FDM Al/Cu

DH-32WCAN... 2.60-3.95 1.25 72*76*114 R32 WR284 FDP/FDM Al/Cu

DH-40WCAN... 3.22-4.90 1.25 65*70*98 R40 WR229 FDP/FDM Al/Cu

DH-48WCAN... 3.94-5.99 1.25 54*63*89 R48 WR187 FDP/FDM Al/Cu

DH-58WCAN... 4.64-7.05 1.25 50*62*81 R58 WR159 FDP/FDM Al/Cu

DH-70WCAN... 5.38-8.17 1.25 48*49*68 R70 WR137 FDP/FDM Al/Cu

DH-84WCAN... 6.57-9.99 1.25 40*48*48 R84 WR112 FBP/FBM/FBE Al/Cu

DH-100WCAN... 8.20-12.4 1.25 38*41*41 R100 WR90 FBP/FBM/FBE Al/Cu

DH-120WCAN... 9.84-15.0 1.25 30*38*38 R120 WR75 FBP/FBM/FBE Al/Cu

H-140WCAN... 11.9-18.0 1.25 27*33*33 R140 WR62 FBP/FBM/FBE Al/Cu

DH-180WCAN... 14.5-22.0 1.25 27*30*30 R180 WR51 FBP/FBM/FBE Al/Cu

*Indicates Model Number. See Ordering Information for complete part number.

Components included in Waveguide Calibration Kits

The necessary components included in waveguide calibration kits include：

coaxial adapter

short

matching load

waveguide section

required hardware kits

All these components is high performance and precision type, which are still well packed in Aluminum Alloy packing case to ensure the components safety and accuracy. The quantity of each components is selected by system application.

Application of Waveguide Calibration Kits

Waveguide Calibration Kits are specialized for providing accurate calibration of vector network analyzers (VNAs) during waveguide components application. They are used for measurements and verification in different type of waveguide type from WR2300 to WR10. Each kit includes all the components requested for most VNAs calibration. Then in order to make sure high effective directivity of waveguide components will be offered.