jachimek76
If you work on grassland every day, you need more than a powerful machine. A technique is helpful, which the farmer not only willingly uses, but also reliably functions in long and hard work.
Read more at : https://www.farmtractorspecs.com
All CLAAS DISCO mowers with a working width of 2.60 m - 14.00 m are equipped with P-CUT cutter bars. And with them, a farmer can not only cleanly collect fodder, but also save power and fuel. By reducing the PTO shaft speed to 850 rpm, fuel consumption is up to 16% lower. The cut quality remains unchanged. The speed is increased to 1000 per min to increase capacity in a dense crop. When the SAFETY LINK module operates, the cutting disc stops immediately. The screw fixes the cutting disc to the beam. This prevents the disc from projecting like a bullet. DISCO mowers are designed to withstand even the highest long-term loads.
CLAAS sliding skids are made of hardened steel. The spaces between the sliding skids are reinforced with Hardox inserts. 24 mm thick gear wheels drive the drive to the cutting discs. Their largest diameter on the market means that many teeth are connected at the same time. The blades can be changed with one hand turn using the mounting lever. Each type of CLAAS mower is available with ACTIVE FLOAT hydropneumatic suspension. Unloading transfers the weight of the mower from the turf to the tractor. The frictional resistance that arises during mowing is converted into rolling resistance, and lateral pulling forces on slopes are reduced and ride comfort is higher. The unloading pressure is read on a clearly visible pressure gauge. The mower also moves over bumps.