Industry News

https://www.sinotextilemachinery.com/news/industry-news/common-troubleshooting-of-rapier-loom-machines--fa.html

Common Troubleshooting Of Rapier Loom Machine'S Fault Maintenance And Appliances
Common troubleshooting of rapier loom machine's fault maintenance and appliances

A, rapier machines

1. The weft accumulator does not work.

A) Check whether the fuse is intact and whether the intermediate relay is damaged.

B) Check to see if the wires are missing from 4 (9), 5 (10), and 6 (11).

2. The weft accumulato yarn is broken but not close the car.

A) Check whether the connection between the line 7 and 8, 12 and 13 falls off.

B) Whether the position between the weft sensor and the number plate is correct, the sensor is damaged, and whether the sensor lead (19,20,21,22,223) will fall off.

3. The weft accumulator yarn is continuous but stops.

Check whether there is a short circuit between the lead 7 and 8 (125B).

B, Warp stopping

1. Break the warp, but not stop the car.

A) Check whether the lead 17 and 18 fall off.