Steps of shower room measuring ruler

1. The dimensions of the plane and elevation of the shower area must be clearly measured, and a sketch should be drawn.　
2. If there is a window in the shower area, the height of the window sill, the width of the window, the height, the distance from the side of the window to the corner, and the distance from the top of the window to the ceiling must be accurate.　　
3. There are exposed hot and cold water pipes, heating pipes, and sewage pipes in the shower area. The size of the pipes, the height from the ground, and the width from the wall must be accurate.　　
4. The concealed water pipes in the shower area should also be asked clearly and marked on the drawing so as to avoid the water pipes in the process of production and installation.　　
5. The position of the toilet or washbasin outside the shower area should also be measured clearly, which is particularly important to open the door to the outside.　　
6. The level of installation of the shower room should also be accurate. If there is no water-proof stone foundation, it is especially important to install the shower room directly on the floor, because the floor is generally uneven because of the water. You can refer to the horizontal line of the tiles to measure down, you can know how much the level is different.　　
7. The width of the bottom edge and the width of the upper edge of the bathroom screen (partition) must be measured accurately. Pay attention to the ruler to be straightened. Generally, the upper and lower widths are different.　　
8. If you want to cap the top, the height of both sides must be measured accurately. Generally, the heights of both sides are different.　　
9. Also indicate whether the door is on the left or right.　　
10. If a shelf is required, the position of the shelf should also be indicated.