How to sync Satellite and router for Orbi login?

This article explains the way to synchronize Orbi satellite Orbi satellite with the Orbi router. Otherwise, Orbi Router login will not be possible. The article will take you through all the steps required to do the same. Read all the steps carefully and you will find that this is not something very tough.

1. The satellite must be placed close to your Orbi router.

Now Connect your satellite to the socket of your wall. There is a Power LED on the back of your Orbi satellite lights. Is the power LED on or off? Switch on the LED lights first.

2. Now wait for the LED light to become white.
There are following possibilities with regard to LED behavior:
o Pulsing white. The pulsating white of the LED means that the satellite you have is booting.
o Solid white. The satellite you have has finished booting and can now sync with the router you have.

There is a sync button on the back side of your satellite. Within the time span of just two minutes, press the sync button of the Orbi router login you have.

The satellite will soon sync to the router. Be ready for Orbi login.

Has the bottom light turned white? One of the three colors will appear for three minutes and the lights will finally turn off. You will be able to do Orbi login now.

o Blue. Syncing was successful and the connection is working well.
o Amber. Syncing was successful and the connection is fair.
o Magenta. No syncing could occur. Bring router and the satellite closer.

2. Take your satellite outside and connect it to socket in the wall.

Note: Keep the temperature between 4 ͦ F to 122 ͦ F (-20 ͦ C to +50 ͦ C).

3. LED light being blue means connection is okay.