PDC DRAG BIT

https://www.sml-pdcbit.com/products/pdc-drag-bit/

The PDC Drag Bit consists of four parts: the bit body, the scraper blade, the water divider cap and the nozzle. The drill body is the body of the scraper bit with welded scraper blade and water divider cap, which is made of medium carbon steel. The lower end is welded with scraper blade and water dividing cap, and the upper end is connected to the drill column with a wire fastener. The drag blade, also called the blade wing, is the main working part of the scraper bit.

PDC Drag bits are suitable for drilling in soft to soft soils and plastic and brittle formations such as mudstone, muddy sandstone, shale, etc. SML's Drag bits are generally produced in customized styles, mostly based on customer drawings and size requirements.

Features Of PDC Drag Bit
PDC Drag Bit are suitable for soft and cohesive formations. Scraper bits break rock by cutting. When a scraper bit works in a soft plastic formation, the cutting process is similar to that of a knife cutting soft metals. The blade eats into the formation under drilling pressure, while the rock in front of the cutting edge is continuously flowing plastically under torsional force, and the rock at the bottom of the well is stripped up in layers.

Advantages Of SML PDC Drag Bit
Professional customization: senior designers design corresponding drawings according to customer needs to meet customer demands.

Extra large water hole design is conducive to water intake and slag discharge, increasing drilling efficiency.

PDC Drag Bit adopts the principle of equal cutting volume to lay the teeth, which makes the bit wear more evenly and prolongs the bit life to the maximum;