AUTODRILLER PRO CONTROL SYSTEM - INDUSTRY-FIRST ADVANCED CONTROLLER TECHNOLOGY

Watch the full video to know more about this technology: https://www.youtube.com/watch?v=ai9boL8hLAAA CONTROL SYSTEM THAT KNOWS WHAT'S IMPORTANT, WHEN IT MATTERS MOSTAUTODRILLER PRO CONTROL SYSTEMAutodriller pro control system removes human variability and enhances drilling performanceThrough sequenced collaboration between H&P drilling technologies, H&P can help reduce human variability and provide game changing drilling performance solutions with an advanced autodriller control system. Traditional autodriller systems require manual gain adjustments that can cause variable results. A related issue associated with gains that are either set too high manually, or with a semi-fixed gain system, can result in block velocity variability that negatively impacts rate of penetration (ROP), and in some cases bit life that results in additional trips with time, fuel, and emissions impacts.H&P'S AUTODRILLER PRO SYSTEM PROVIDES STABLE DRILLING WITH DIFFERENTIAL PRESSURE, REDEFINING THE VALUE DERIVED FROM AN AUTODRILLER SYSTEMAUTODRILLER TECHNOLOGY COMPARISONOvershoot Prevention vs Smooth Drilling• Automated gain settings • Controls block velocity with weight-on-bit (WOB) • High gain controller with fast and hard responses • Option to remove ROP Limit • Lower gain controller for smoother drilling and more consistent block velocity • Strong controller responses while not over-reacting to fluctuations in downhole conditions • Differential pressure can be used to control block velocityANALYSIS OF AUTODRILLER VARIABILITYVariability of ParametersVariability of autodriller parameters shows that though WOB and differential pressure responses are generally similar, ROP (directly associated with block velocity) is significantly less variable with Autodriller Pro.REDUCE TIME TO TARGETObservations at same depth interval• Block velocity (green) shows less variability with Autodriller Pro • Higher differential pressure was achieved with AutoDriller Pro as the system successfully switched between WOB and differential pressure while maintaining smoother block velocity • ROP limit is disabled on Autodriller Pro with ROP overshoot observed on 4 of 5 standsMULTI-WELL CASE STUDYSmoother Block Velocity leads to improved drilling performance• Average rotating ROP improved 21%, 31% in intermediate, lateral section respectively• Reduced drilling time by an average of 16.6 hours per well compared with standard autodriller systems • Total on-bottom time reduced by 17% • Opportunity to identify roadmap intervals with deviation measurementsF I E L D - P R O V E N R E S U L T SIncrease Your Bottomline with Faster Drilling and Cut Trips Per WellIncreased ROP by 21% in the intermediate and 31% in the lateral Time to Cost Savings: ~$30,000CUT UNPLANNED TRIPS PER WELLReduced 16 hours in unplanned trip time Removing unplanned trips saved $30,000 per wellDECREASE FUEL CONSUMPTION AND EMISSIONS26% reduction in fuel and CO2 as a result of faster drilling and no unplanned trips $18,000 per well in fuel savings and emissions benefits~$78K PER WELL TOTAL VALUE CREATIONVisit the full product literature from here: https://www.helmerichpayne.com/media/product-literature/Autodriller-Pro-Sell-Sheet_2022-03-25-144410_jngz.pdfFor more information on how our Autodriller Pro Control System can help you achieve better drilling outcomes, contact an H&P sales representative today or contact us through our website at helmerichpayne.com/contact. It's time to follow through on your drilling performance potential.