I finally finished Pidge's bayard! Okay, so I first traced out the bayard and then cut out the cardboard (one side's black while the other one's white)
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
The batteries were in a plastic box, which was what determines how far apart the sides would be. So, I taped them together, making sure the switch was on the bottom of the handle. (That lil' piece of tape is there bc I poked a hole for the switch, but it didn't work)
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
Once that was done, I cut out some pieces and glued them in between the sides. One side was black so I could save some black paint for it.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
I attached the triangle pieces and the Tetris lookin ones on each side to give it more dimension. Right after I installed the lights inside.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
So then I painted all the sides. I attached some carboard inside to keep the light from going in the little space. The lime green is plastic you normally find on product boxes colored with a Sharpie.
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
Last thing to do was cut out and color the plastic for the sides and glue hem together! This was a fun project to do, I will be showing the cosplay when I finish it. See you guys later! Bye!
Oops! This image does not follow our content guidelines. To continue publishing, please remove it or upload a different image.
