Kamen Rider Evol : Another End

Experiment-13 : The Faust Files ( II )

[ Prototype Transformation Belt Build Driver ]

Components :

Vortex Charger - The circular energy generator unit. By turning the Vortex Lever, it enables the Vortex Charger to spin, activating the internal Nitro Dynamo engine( the V***i version of the Driver instead utilizes the Cyclo-Dynamo engine )in order to produce enough energy as needed for various purposes, such as transformation or deathblows. It should be noted that the performance for the prototype has not yet been optimised.

Vortex Lever - The crank used to activate and operate the Build Driver. The faster the crank is spun, the more energy is produced by the internal engine. Do note that however due to still being in the trial phase, the performance is still unoptimized and over-cranking the lever may yield unexpected results.

Twin Fullbottle Slots - The slots that Fullbottles are inserted into. It takes in the Transgel Solid inside of the respective Fullbottles and transfers it to the Building Modules. In the V***i version of the driver, the abiotic Fullbottle slot is modified to enable compatibility with the Rider System Evolbottle. Meanwhile, in C*****a's version of the driver, the biotic Fullbottle slot has been modified to allow a second abiotic Fullbottle into the Driver.

Building Modules - An expansion device built into the Twin Fullbottle Slots. During transformation, it develops the Snap Ride Builder for Kamen Rider Build. Other types of Builders may also be deployed for various weaponries, or to enable other transformations.

Safety Guard Case - The casing which holds the inner components together. It utilizes high-strength material with heat and impact resistance, allowing it to protect internal mechanisms. Do note however, due to the experimental nature of the device, if it were to sustain damage beyond the tolerable range, the user will be forcibly ejected from their current transformation.

Adjust Bind - The yellow strap used to fix the Build Driver on the user's waist. When the Driver is not in use, it is stored inside the driver. The V***i version of the Driver features a turquoise-colored strap.

Qualifizer - A biometric scanning device located in the black section at the rear of the Adjust Bind. It's primary function is reading the wearer's Hazard Level. A minimum Hazard Level of 3.0 is required to be able to transform using the Build Driver, otherwise the anti-theft security measures on the Driver will activate. The V***i version of the Driver will also scan the user's Honkai Levels.

L&P Amplifier - A converter installed inside the Driver that converts emotions into energy. The stronger the emotions, the more potent the effects will be. This is due to their Hazard Level/ Honkai Levels increasing depending on emotions.

BLD Ride Port - A slot located above the Vortex Charger. It's primary function is to allow the H****d T*****r to be inserted into the Build Driver. In the V***i version of the Driver, the BLD Ride Port has been modified to allow compatibility with the V****x T*****r.